2.4GHz Wireless PIR Sensor Switch

This wireless PIR sensor switch is part of our Lingyue wireless smart control switch series. This series of switches combines sensing, dimming and color temperature adjustment. The dedicated buttons for these functions make the switches simple and intuitive to use. This PIR sensor switch has two selectable operating modes, with you able to choose between 24-hour operation or night-only operation. It is ideal for use with dual-color-temperature LED strips, allowing you to switch to the most suitable lighting for your needs at any time.

1. Function

Detecting range: 0-3M

Detecting angle: 120°

Control the lights come on when people come and go out when people leave

Three function buttons: Adjust the brightness and color temperature

Light sensor switch: Sun- work all day;

moon: only work at night

2. Battery compartment

This product is powered by a CR2450 button cell battery. To change the battery, rotate the battery cover on the bottom of the switch to unlock it, then remove the screw. Button A inside is the pairing button.

Installation tips :

1. Avoid placing it in areas with strong winds, heat sources or high temperatures, as this may result in false triggering.
2. The sensor is not waterproof, so do not install it in any place where there is heavy rain or humidity.

*This 2.4 GHz wireless sensor switch works with the receiver(for details on how to pair the devices, please refer to the receiver's details page).

This product comes in a paper box, as shown in the picture below.